This very reliable and powerful pump with check valve can be used freestanding or installed directly in the unit. In addition, wall mounting of the pump is possible, as there are two brackets at the back with which the pump can be attached to the wall with two screws. The pump is suitable for condensation water, but not for dirty water. The water can be fed to the pump via a maximum of 3 inlets and is pumped away via a thin 3/8-inch (10 mm) connection by means of a hose up to a maximum height of 4 metres (the hose is not included in the scope of delivery). The pump has a cable with a three-pin Schuko power connection (230V) ex works.

The pump's non-return valve prevents water from flowing back out of the outgoing hose ! The condensation water pump has a float that only starts the unit when water has accumulated. The pump can therefore also be used when water is not constantly flowing in. It is also possible to connect the pump to the circuit of a dehumidifier (building dryer) so that the dehumidifier would switch off in the event of a defect in the pump (this work must be carried out by an electrician).

Examples of delivery capacity:
At 0 m height: 360 litres per hour
At 2 m height: 240 litres per hour
At 4 m height: 192 litres per hour